used 200x200x14mm DFT Tubemill

ERW Tube Mill

Your current location：首页 > Products > ERW Tube Mill > used 200X200X14mm DFT tubemill

used 200X200X14mm DFT tubemill

stock number: 584, it is written on 07/April/2024

product description
Technical Parameters

used 200x200x16mm DFT Tubemill

Material: hot rolled steel Q355

coil width: 270-800mm；

coil thickness:3.0-14.0mm；

coil ID：F610mm-F760mm，coil OD:F1000-F2100mm；

coil weight: Max18000kg；

output square tube:width 80-200mm，height 80-250mm

wall thickness:3-16mm(Q235),3-14mm(Q355),3-12mm(T700)

cut to length:4.0-12.0 m，accuracy: 0-5 mm；
main motors list

stands	Motor KW	rotary speed	drive shaft model
H1,H2,H3,H4	160KW+Hardened gearbox	1000/2000rpm	SWC285
H5,H6,H7,H8	160KW+Hardened gearbox	1000/2000rpm	SWC285
H9-FP1-FP3	160KW+Hardened gearbox	1000/2000rpm	SWC285
SZ1- SZ2－SZ3- SZ4	200KW+Hardened gearbox	1000/1800rpm	SWC285

horizontal roll shaft diameter: 230mm, material: 42CrMovertical roll shaft diameter: 120mm, material: 42CrMo

scope of supply:

1）uncoiler

2）leveler

3）shear welder

4）horizontal accumulator

5）forming machine: vertical roller X3 stands, rough forming: horizontal roller x9 stands,fin forming: 3 stands, support roller: 5 stands, guiding roller, welding extrusion device, polishing stand, cooling tank

6）sizing machine: 4 stands, leveling roller: 2 stands

7）1000kw HF welder

8）milling cutter

9）ROT

10) electric control system

11) hydraulic system

12) molds

If you want to quote or further information on this product, please fill out the form below.

product name
Your Name
phone number
E-mai *
Message content *
Security Code *

Previous:used (4-12.7)xOD273mm ERW tubemill

Next:2007 used 5-12.5×300×300mm DFT